AIWROK手机执行器MQTT浏览器控端
AIWROK手机执行器MQTT浏览器控端
/**
* AIWROK 手机执行器（MQTT 群控端）
* ------------------------------------------------------------------
* 配套：指挥台.html（电脑浏览器打开）
* 作用：手机连上 MQTT 后待命，电脑发指令 → 手机执行 → 结果回传
*
* 主题约定（ROOM 换成你自己的房间号，避免和别人串台）
* 收：aiwrok/<ROOM>/cmd/<本机机号> 只发给某一台
* 收：aiwrok/<ROOM>/cmd/all 广播，所有机器都执行
* 发：aiwrok/<ROOM>/ret/<本机机号> 心跳 + 执行结果 + 截图
*
* 支持的指令（JSON）
* {"cmd":"PING"}
* {"cmd":"STATUS"}
* {"cmd":"SHOT"} 截图回传
* {"cmd":"CLICK","x":540,"y":960} 点坐标
* {"cmd":"SWIPE","x1":540,"y1":1400,"x2":540,"y2":500,"ms":300} 滑动
* {"cmd":"TEXT","text":"你好"} 输入中文
* {"cmd":"APP","pkg":"com.tencent.mm"} 打开应用
* {"cmd":"HOME"} / {"cmd":"BACK"}
* {"cmd":"LOOP","act":"SWIPE","count":30,"min":1500,"max":4000}循环养机
* {"cmd":"STOP"} 停止循环
* 带 "id":"xxx" 的回执会原样带回，方便电脑配对
* ------------------------------------------------------------------
*/
// ==================== 配置：只改这三行 ====================
var ROOM = "room001"; // 房间号，多台电脑/多套设备用它隔离
var DEV_ID = ""; // 机号，留空=自动用 IMEI 后 6 位
var BROKER = "tcp://broker.emqx.io:1883";
var SHOT_MAXW = 540; // 回传截图最大宽度，超出等比缩小
var SHOT_QUAL = 60; // JPEG 质量 1-100，调小更省流量更不易掉线
// ========================================================
var T = {
cmdMine : "", cmdAll : "", ret : ""
};
// ---------- 日志 ----------
// 重要：printl 只能在脚本主线程调用。Paho 的回调（收消息/掉线）跑在别的
// Java 线程上，在那里直接 printl 会抛异常并打死消息派发线程，表现为
// "只收到第一条指令，之后全部丢失，最后 32000 超时掉线"。
// 所以回调里只入队，由主线程定时器统一刷出。
var IN_CALLBACK = false;
var LOGQ = [];
function log(s) {
if (IN_CALLBACK) {
if (LOGQ.length < 500) LOGQ.push(s); // 回调线程：只入队，绝不 printl
} else {
try { printl("[执行器] " + s); } catch (e) {}
}
}
function logk(s) { log(s); }
// 主线程刷日志队列
function flushLog() {
var n = 0;
while (LOGQ.length > 0 && n < 30) {
try { printl("[执行器] " + LOGQ.shift()); } catch (e) { LOGQ.length = 0; break; }
n++;
}
}
// ==================== 1. 加载 Paho ====================
var dexName = "paho-mqtt.dex";
try {
rhino.loadDex(dexName);
log("dex 已加载");
} catch (e) {
log("loadDex 跳过（可能系统已自动加载插件）：" + e.message);
}
try {
importClass(Packages.org.eclipse.paho.client.mqttv3.MqttClient);
importClass(Packages.org.eclipse.paho.client.mqttv3.MqttConnectOptions);
importClass(Packages.org.eclipse.paho.client.mqttv3.MqttCallback);
importClass(Packages.org.eclipse.paho.client.mqttv3.MqttMessage);
importClass(Packages.org.eclipse.paho.client.mqttv3.persist.MemoryPersistence);
log("Paho 类导入成功");
} catch (e) {
log("Paho 类导入失败：" + e.message);
log("请把 paho-mqtt.dex 放到本工程的 插件\\ 目录后重跑");
exit();
}
// ==================== 2. 设备信息 ====================
function deviceInfo() {
var o = { brand: "?", model: "?", imei: "", w: 0, h: 0, android: "?" };
try { o.brand = "" + device.getBrand(); } catch (e) {}
try { o.model = "" + device.getModel(); }catch (e) {}
try { o.imei= "" + device.getIMEI(); } catch (e) {}
try { o.w = screen.getScreenWidth(); o.h = screen.getScreenHeight(); } catch (e) {}
try { o.android = "" + java.lang.System.getProperty("os.version"); } catch (e) {}
return o;
}
var INFO = deviceInfo();
if (!DEV_ID) {
DEV_ID = INFO.imei ? ("" + INFO.imei).slice(-6) : ("dev" + Math.floor(Math.random() * 10000));
}
DEV_ID = "" + DEV_ID;
T.cmdMine = "aiwrok/" + ROOM + "/cmd/" + DEV_ID;
T.cmdAll= "aiwrok/" + ROOM + "/cmd/all";
T.ret = "aiwrok/" + ROOM + "/ret/" + DEV_ID;
// ==================== 3. 状态 ====================
var client = null, connected = false;
var needReconnect = false; // 掉线标记，主线程看门狗处理
var startAt = (new Date()).getTime();
var nRecv = 0, nSent = 0, nRun = 0;
var loopOn = false; // 循环任务开关
var CMDQ = []; // 指令队列：回调线程入队，主线程执行
// ==================== 4. 回传 ====================
function report(obj, retain) {
if (!connected) { log("未连接，回传丢弃：" + obj.type); return; }
try {
// 每条都带设备信息，指挥台晚打开也能立刻显示品牌型号屏幕
obj.dev = DEV_ID; obj.room = ROOM;
obj.brand = INFO.brand; obj.model = INFO.model;
obj.screen = INFO.w + "x" + INFO.h;
obj.ts = (new Date()).getTime();
var m = new MqttMessage();
m.setPayload(new java.lang.String(JSON.stringify(obj)).getBytes("UTF-8"));
m.setQos(retain ? 1 : 0);
if (retain) m.setRetained(true); // 上线消息保留，新连接的网页立刻能看到
client.publish(T.ret, m);
nSent++;
} catch (e) { log("回传失败：" + e.message); }
}
// ==================== 5. 指令实现 ====================
function doClick(x, y) {
auto.clickPoint(x, y);
return { x: x, y: y };
}
function doSwipe(o) {
var x1 = o.x1 || INFO.w / 2, y1 = o.y1 || INFO.h * 0.75;
var x2 = o.x2 || INFO.w / 2, y2 = o.y2 || INFO.h * 0.25;
var ms = o.ms || 300;
auto.swip(x1, y1, x2, y2, ms, 0);
return { x1: x1, y1: y1, x2: x2, y2: y2, ms: ms };
}
function doText(t) {
input.sendString(t);
return { len: ("" + t).length };
}
function doShot() {
var bmp = screen.screenShotFull();
if (!bmp) throw new Error("截图返回空");
var b64 = null;
try {
// 先等比缩放到 shotMaxW 宽，再压成 JPEG：
// 原始 PNG base64 动辄 200KB，大包容易让连接超时掉线
var w = bmp.getWidth(), h = bmp.getHeight();
var target = bmp;
var from = null;
try {
if (w > SHOT_MAXW) {
var sc = SHOT_MAXW / w;
var m = new Packages.android.graphics.Matrix();
m.postScale(sc, sc);
target = Packages.android.graphics.Bitmap.createBitmap(bmp, 0, 0, w, h, m, true);
from = target;
}
} catch (eScale) { target = bmp; }
var bos = new java.io.ByteArrayOutputStream();
target.compress(Packages.android.graphics.Bitmap.CompressFormat.JPEG, SHOT_QUAL, bos);
var bytes = bos.toByteArray();
b64 = "" + Packages.android.util.Base64.encodeToString(bytes, Packages.android.util.Base64.NO_WRAP);
if (from) { try { from.recycle(); } catch (e2) {} }
} catch (e) {
// 压缩链路失败：退回原图 base64，至少截图功能还能用
try { b64 = "" + bmp.toBase64(); } catch (e5) { b64 = null; }
}
if (!b64 || b64.length < 32) {
try { bmp.recycle(); } catch (e3) {}
throw new Error("截图压缩失败");
}
try { bmp.recycle(); } catch (e4) {}
var kb = Math.round(b64.length / 1024);
if (kb > 400) throw new Error("截图仍过大 " + kb + "KB，请调小 shotMaxW 或 shotQuality");
return { img: b64, kb: kb };
}
function doApp(pkg) {
app.openApp(pkg);
return { pkg: pkg };
}
function doHome() { auto.home(); return {}; }
function doBack() {
// 不同版本方法名可能不同，逐个试，失败也打日志
if (typeof auto.back === "function") { auto.back(); return {}; }
throw new Error("此版本 auto 无 back()，可用 CLICK 点返回键坐标");
}
// 循环养机：反复做同一个动作 + 随机等待，模拟真人
function runLoop(o) {
loopOn = true;
var act = o.act || "SWIPE";
var count = o.count || 0; // 0 = 无限，直到 STOP
var minMs = o.min || 2000, maxMs = o.max || 6000;
var i = 0;
logk("循环开始 act=" + act + " count=" + count);
report({ type: "LOOP", state: "start", act: act, count: count });
(function step() {
if (!loopOn) { logk("循环已停止，共 " + i + " 次"); report({ type: "LOOP", state: "stop", times: i }); return; }
try {
if (act === "SWIPE") doSwipe(o);
else if (act === "SHOT") { var r = doShot(); report({ type: "SHOT", ok: true, kb: r.kb, img: r.img }); }
else if (act === "CLICK") doClick(o.x || INFO.w / 2, o.y || INFO.h / 2);
nRun++;
i++;
if (i % 10 === 0) { log("循环进度 " + i + " 次"); report({ type: "LOOP", state: "run", times: i }); }
} catch (e) {
log("循环单次失败：" + e.message);
report({ type: "LOOP", state: "err", err: e.message, times: i });
}
if (count > 0 && i >= count) {
loopOn = false;
logk("循环完成 " + i + " 次");
report({ type: "LOOP", state: "done", times: i });
return;
}
var wait = minMs + Math.floor(Math.random() * Math.max(1, maxMs - minMs));
setTimeout(step, wait);
})();
}
// ==================== 6. 指令分发 ====================
function handle(raw, from) {
nRecv++;
var o;
try { o = JSON.parse(raw); }
catch (e) { log("非 JSON 指令，忽略：" + raw); return; }
var cmd = (o.cmd || "").toUpperCase();
log("收到 " + cmd + " 来自 " + from + " id=" + (o.id || "-"));
var res = { type: "ACK", cmd: cmd, id: o.id || "" };
try {
if (cmd === "PING") { res.ok = true; res.msg = "pong"; }
else if (cmd === "STATUS"){
res.ok = true;
res.info = { brand: INFO.brand, model: INFO.model, screen: INFO.w + "x" + INFO.h,
android: INFO.android, up: Math.round(((new Date()).getTime() - startAt) / 1000),
recv: nRecv, sent: nSent, run: nRun, loop: loopOn, connected: connected };
}
else if (cmd === "CLICK") { res.ok = true; res.data = doClick(parseInt(o.x, 10), parseInt(o.y, 10)); }
else if (cmd === "SWIPE") { res.ok = true; res.data = doSwipe(o); }
else if (cmd === "TEXT"){ res.ok = true; res.data = doText(o.text || ""); }
else if (cmd === "SHOT"){
log("截图中…");
var r = doShot();
res.ok = true; res.kb = r.kb; res.img = r.img; // 截图直接带图回传
log("截图完成 " + r.kb + "KB");
}
else if (cmd === "APP") { res.ok = true; res.data = doApp(o.pkg); }
else if (cmd === "HOME"){ res.ok = true; doHome(); }
else if (cmd === "BACK"){ res.ok = true; doBack(); }
else if (cmd === "LOOP"){ runLoop(o); res.ok = true; res.msg = "循环已启动"; }
else if (cmd === "STOP"){ loopOn = false; res.ok = true; res.msg = "已发送停止"; }
else { res.ok = false; res.err = "未知指令 " + cmd; }
} catch (e) {
res.ok = false; res.err = "" + e.message;
log("执行失败：" + e.message);
}
report(res);
}
// ==================== 7. 连接 ====================
function connect() {
var cid = "aiwrok_" + ROOM + "_" + DEV_ID + "_" + Math.floor(Math.random() * 1000);
logk("连接 " + BROKER + "clientId=" + cid);
client = new MqttClient(BROKER, cid, new MemoryPersistence());
var opt = new MqttConnectOptions();
opt.setCleanSession(true);
opt.setKeepAliveInterval(45);
opt.setConnectionTimeout(15);
opt.setAutomaticReconnect(true);
client.setCallback(new MqttCallback({
connectionLost: function (c) {
IN_CALLBACK = true;
try {
connected = false;
needReconnect = true;
log("掉线：" + c + "（等主线程看门狗重连）");
} catch (e) {} finally { IN_CALLBACK = false; }
},
messageArrived: function (topic, msg) {
IN_CALLBACK = true; // 本线程禁止 printl / 禁止做重活
try {
var text = "" + new java.lang.String(msg.getPayload(), "UTF-8");
var from = ("" + topic === T.cmdAll) ? "广播" : "定向";
// 只入队，真正的执行交给主线程（截图/点击在回调线程里会卡住 MQTT 读循环）
if (CMDQ.length < 200) CMDQ.push({ raw: text, from: from });
} catch (e) {
// 绝不把异常抛回 Paho，否则派发线程会被打死
if (LOGQ.length < 500) LOGQ.push("收包异常：" + e.message);
} finally { IN_CALLBACK = false; }
},
deliveryComplete: function (t) { }
}));
client.connect(opt);
connected = true;
needReconnect = false;
client.subscribe(T.cmdMine, 1);
client.subscribe(T.cmdAll, 1);
logk("已订阅 " + T.cmdMine + " 和 " + T.cmdAll);
report({ type: "ONLINE" }, true); // 保留消息：网页后开也能看到
flushLog();
}
// ==================== 8. 启动 ====================
logk("启动 机号=" + DEV_ID + " 房间=" + ROOM + " 屏幕=" + INFO.w + "x" + INFO.h + " " + INFO.brand + " " + INFO.model);
try { connect(); }
catch (e) { connected = false; needReconnect = true; log("首次连接失败：" + e.message + "，看门狗会持续重试"); }
// ---------- 主线程看门狗：刷日志 + 重连 + 重订阅 ----------
// 回调线程不能 printl，日志靠这里刷出来；重连后必须重新订阅，
// 因为 cleanSession=true 时 Paho 不会替你恢复订阅。
var resubTried = 0;
setInterval(function () {
// 1) 主线程执行排队的指令
var k = 0;
while (CMDQ.length > 0 && k < 5) {
var job = CMDQ.shift();
try { handle(job.raw, job.from); }
catch (e) { log("指令执行异常：" + e.message); }
k++;
}
flushLog(); // 2) 刷出回调攒下的日志
try {
var real = client ? client.isConnected() : false;
if (real && !connected) { // 自动重连成功了
connected = true; needReconnect = false;
try {
client.subscribe(T.cmdMine, 1);
client.subscribe(T.cmdAll, 1);
log("已恢复连接并重新订阅");
} catch (e) { log("重订阅失败：" + e.message); }
report({ type: "ONLINE" }, true);
}
if (!real && client) { // 掉线：主动重连
connected = false;
resubTried++;
if (resubTried % 8 === 0) { // 约每 8 秒试一次
log("看门狗触发重连…");
try { client.reconnect(); }
catch (e) {
log("reconnect 失败：" + e.message + "，重建连接");
try { connect(); } catch (e2) { log("重建失败：" + e2.message); }
}
}
}
} catch (e) { log("看门狗异常：" + e.message); }
}, 1000);
// ---------- 心跳：电脑端据此判断在线 ----------
var needShot = false; // 改成 true 则每次心跳附带一张截图
var beat = 0;
setInterval(function () {
beat += 1;
if (connected) {
var o = { type: "HEART", up: beat * 20, recv: nRecv, sent: nSent, run: nRun, loop: loopOn };
if (needShot) { try { var r = doShot(); o.img = r.img; o.kb = r.kb; } catch (e) {} }
report(o);
} else {
log("当前离线，心跳跳过（看门狗重连中）");
}
}, 20000);
log("已进入待命：每 1 秒刷日志/查连接，每 20 秒上报心跳。停止请点 IDE 停止按钮");
页:
[1]